129496SH-KIT

1-800-624-8185

(No reviews yet) Write a Review
SKU:
129496SH-KIT
UPC:
129496SH-KIT
Condition:
New
Hydroboost Pushrod Kit - 129496SH-KIT

 

Make sure to measure the bore size of your hydroboost first as shown on the flyer to ensure this is the one that you need.  The bore size should be 1.6"-1.65" if using a micrometer, or 1 " if using a ruler or tape measurer.

 

  • Hydroboost repair kit 129496SH. Condition is New.
FAQ
  • Total rod length is 4 3/4". Rod is 3/8" thick
  • 1995 model vehicles and prior years generally require a small hole kit.
  • 1996 model vehicles and newer years generally require a big hole kit. 
  • NOTHING beats measuring the bore of the hydroboost with a caliper if there is any doubt!
  • Thoroughly read included instructions which are also posted below.
  • Contact us with any additional questions once you read the information here.

 

hydroboost-kit-page-1.jpg

hydroboost-kit-page-2.jpg

 

hydroboost-assembly-1.jpg

 

hydroboost-assembly-2.jpg

 pg6.jpg

pg7.jpg

 

 

 

 

 

 

 

 

Hydroboost Kit

Assembly Instructions

Cutting and Shaping the Rod